| |
UDEV ASMDisk Configuration
Because Oracle could not support RHEL6 series ASMLib, so we can change the way Udev configuration ASMDisk, detailed as follows:
Priority use of udev configure ASM storage block device information.
1. Make sure the package is installed udev
[Root @ rac01 ~] # rpm -qa | grep udev
udev-147-2.40.el6.x86_64
2. Obtain information system hard disk WWID
(1) Oracle Linux 5 with the following command
[Root @ rac01 ~] # / sbin / scsi_id -g -u -s / block / sdb
SATA_VBOX_HARDDISK_VBd306dbe0-df3367e3_
[Root @ rac01 ~] # / sbin / scsi_id -g -u -s / block / sdc
SATA_VBOX_HARDDISK_VB46dec7e0-192e8000_
[Root @ rac01 ~] # / sbin / scsi_id -g -u -s / block / sdd
SATA_VBOX_HARDDISK_VBce8c63bb-ac67a172_
[Root @ rac01 ~] # / sbin / scsi_id -g -u -s / block / sde
SATA_VBOX_HARDDISK_VB7437a3b7-95b199cd_
(2) Oracle Linux 6 with the following command
[Root @ rac01 ~] # / sbin / scsi_id -g -u -d / dev / sdb
SATA_VBOX_HARDDISK_VBd306dbe0-df3367e3_
[Root @ rac01 ~] # / sbin / scsi_id -g -u -d / dev / sdc
SATA_VBOX_HARDDISK_VB46dec7e0-192e8000_
[Root @ rac01 ~] # / sbin / scsi_id -g -u -d / dev / sdd
SATA_VBOX_HARDDISK_VBce8c63bb-ac67a172_
[Root @ rac01 ~] # / sbin / scsi_id -g -u -d / dev / sde
SATA_VBOX_HARDDISK_VB7437a3b7-95b199cd_
3. / dev / sdb 4G hard disk divided into two main areas, each area 2G, in order to achieve redundancy OCR information
[Root @ rac01 ~] # fdisk / dev / sdb
4. / dev / sdc 8G hard disk divided into four logical, one for each region 2G, to store data files
[Root @ rac01 ~] # fdisk / dev / sdc
5. Configure udev configuration file
Important: Each profile a behavior rule, and, (comma) between the lower one of the words and spaces.
[Root @ rac01 ~] # cd /etc/udev/rules.d/
[Root @ rac01 rules.d] # vi 99-oracle-asmdisk.rules
(1) Oracle Linux 5 with the following parameters
KERNEL == "sd? [1-2]", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -s / block / $ parent", RESULT == "SATA_VBOX_HARDDISK_VBd306dbe0-df3367e3_", NAME = "asm-disk1", OWNER = "grid", GROUP = "asmadmin", MODE = "0660"
KERNEL == "sd? [5-8]", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -s / block / $ parent", RESULT == "SATA_VBOX_HARDDISK_VB46dec7e0-192e8000_", NAME = "asm-disk2", OWNER = "grid", GROUP = "asmadmin", MODE = "0660"
KERNEL == "sd? 1", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -s / block / $ parent", RESULT == "SATA_VBOX_HARDDISK_VBce8c63bb-ac67a172_", NAME = "asm -disk3 ", OWNER =" grid ", GROUP =" asmadmin ", MODE =" 0660 "
KERNEL == "sd? 1", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -s / block / $ parent", RESULT == "SATA_VBOX_HARDDISK_VB7437a3b7-95b199cd_", NAME = "asm -disk4 ", OWNER =" grid ", GROUP =" asmadmin ", MODE =" 0660 "
(2) Oracle Linux 6 with the following parameters
KERNEL == "sd? [1-2]", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -d / dev / $ parent", RESULT == "SATA_VBOX_HARDDISK_VBd306dbe0-df3367e3_", NAME = "asm-disk1", OWNER = "grid", GROUP = "asmadmin", MODE = "0660"
KERNEL == "sd? [5-8]", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -d / dev / $ parent", RESULT == "SATA_VBOX_HARDDISK_VB46dec7e0-192e8000_", NAME = "asm-disk2", OWNER = "grid", GROUP = "asmadmin", MODE = "0660"
KERNEL == "sd? 1", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -d / dev / $ parent", RESULT == "SATA_VBOX_HARDDISK_VBce8c63bb-ac67a172_", NAME = "asm -disk3 ", OWNER =" grid ", GROUP =" asmadmin ", MODE =" 0660 "
KERNEL == "sd? 1", BUS == "scsi", PROGRAM == "/ sbin / scsi_id -g -u -d / dev / $ parent", RESULT == "SATA_VBOX_HARDDISK_VB7437a3b7-95b199cd_", NAME = "asm -disk4 ", OWNER =" grid ", GROUP =" asmadmin ", MODE =" 0660 "
6. Confirm normal configuration, the correct block device permissions
# Cd / dev
# Ls -al asm-disk *
brw-rw-- 1 grid asmadmin 8, 17 Apr 8 22:47 asm-disk1
brw-rw-- 1 grid asmadmin 8, 33 Apr 8 22:47 asm-disk2
brw-rw-- 1 grid asmadmin 8, 49 Apr 8 22:47 asm-disk3
brw-rw-- 1 grid asmadmin 8, 65 Apr 8 22:47 asm-disk4 |
|
|
|