| |
The first step: we need a RedHat6.4 installation image file
Step Two: We need to download the iso file system from the Internet so that the computer boot from the CD or U disk
Step 3: After a successful boot CD or U disk interface appears as follows:
Interface Description:
Install or upgrade an existing system to install or upgrade an existing system
install system with basic video driver during installation using the basic graphics driver
Rescue installed system into the system repair mode
Boot from local drive to exit the installation from the hard disk
Here select the first item, install or upgrade an existing system, Enter.
Arises as to whether to CD media test questions, here select "Skip" to skip the test.
Then there will be installation screen, click Next
We choose what language to install the system
Here I choose Simplified Chinese, English master general is selected by default
Select the default keyboard format, you can set the default general
Select Basic Storage Devices
Storage device Warning: Select Yes to ignore all data
To his beloved computer from a personality name it!
Fast graphical way to configure your network card IP, gateway, subnet mask it! Very simple
Click Configure Network
Click below to add
Now set the NIC's IP address subnet mask gateway
IP: 192.168.80.100
Gateway: 192.168.80.2
Subnet Mask: 255.255.255.0 or 24 (where 24 = 255.255.255.0 just what will do)
Click Apply
Here to configure the network to complete it! Here that is simple to use graphically set the IP address of the computer
Then I will show you how to use the command line to set the IP address
Click Next:
Set the system time zone to time default
Click Next.
Password system settings
Choose a custom layout (custom system partition)
Now we come to the system partition, a total of 20G hard disk space
One: you must partition
/ Root partition (typically set after the completion of the rest of the other partition space)
Swap swap partition (generally set to 2 times the memory, can not exceed 2G)
II: Recommended partition
/ Boot boot partition (typically set the boot file system used to store 200M)
Now we are planning to install the above system partition
Now first of all to create a / boot partition
Now create a swap partition
Now let's create the root partition, the remaining space allocated to the root partition
If you want to add more partitions, please follow the above manner can add
Click Next, select the root partition
Select Format
Choose to write changes to disk
This interface is installed you can set the default boot
Select Install System version: Basic Server
Here is the process of installing the system!
Click Reboot to reboot the system
Here RedHat Server Edition installation is complete, even if it! |
|
|
|